Computerized Automatic Cement Shoe Toe Lasting Machine
Min. Order: 1 Set/Sets
Delivery Time: 7 Days
Model No.: TH-739MA
Certification: CE, Other, ISO9001
Applicable Material: Fabric, Plastic, Genuine Leather, Artificial Leather, Other
Function: Shoemaking Line
Power Supply: Hydraulic
Packaging: Wooden Case Packing
Productivity: 1300-1600 Pairs per 8 hour
Transportation: Ocean, Land, Air
Place of Origin: China
Supply Ability: 50 SETS PER MONTH
HS Code: 84532000.00
Port: Shenzhen, Guangzhou
TH-739MA Toe Lasting Machine used for the lasting operation of the upper`s forepart and equipped with the applicator. The rod cement of polyester or polyimide is designed for use, which ensures higher flexibility.
Computerized Automatic Cement Shoe Toe Lasting Machine Features:
The fully hydraulic operating system is equipped with all our series Shoe Lasting Machine.
The PLC program is inputted with the touch screen to operate the Shoe Machine with the graphical symbols.
The setting of the parameters (time and stroke) is by numerical key in, with the protection of the key switch to avoid the reading or changing by the non-authorized.
Over 50 different shoe size are programmable and memorable with the Automatic Shoe Lasting Machine.
Lasting error diagnostic is readable on the Shoe Making Machine monitor.
9 fine adjustable and quick-exchangeable pincers are mounted on a double tracking pincer plate.
The first pincer can be adjusted with the 15 degrees swing angle left or right, it is suitable for the pincer arrangement of the special toe shape shoes.
The automatic turning inward of the fifth pincers, increase the lasting perfection of the inner part.
Each pincer can be set with automatic pulling or manual operated, preventing the upper made of different materials is only pulled on one side.
After the upper clamping movement of the pincers, it is possible to operate the pincer release and clamp movement manual.
The clamping pressure of the pincers can be set with the decompress function during the second time upward movement of the last support.
The upward stroke of the last support can be adjusted from the knob outside the machine and equipped with the position indicator.
There are two step upward movement functions for the last support, preventing the slipped of the last when combined with the movement of the heel support.
The two segment designed applicator can be used for the quick adjustable width, and also the changeable inner part for the left or right automatically.
The position of the applicator can be quick adjusted forward or backward up to 16mm from the knob front of the machine.
The toe pusher mechanism is designed with adjustable two step pressure. During the movement of the initial pressure, there are two ways (pressure controlled or position controlled) can be set for the best operation.
The forward movement of the wiper can be adjusted as no stepped variable speed controlled.
The standard equipment: Auxiliary wiper mechanism, Auxiliary side pusher mechanism and Toe projector mechanism.
|Amount of pincers||9|
|Motor power||2 HP|
|Oil Pressure||50 kg/cm2|
|Voltage||380V / 220V 50-60HZ|
|Hydraulic oil capacity||110 liters|
|Machine size(LxWxH)||980X1750X1950 mm|
|Country of origin||Made in China|
Our Main products
The related products